[ Avaa Bypassed ]

index_title=System and Server Status
index_name=Service name
index_host=On host
index_desc=Monitoring
index_up=Status
index_last=Last check
index_local=Local
index_add=Add monitor of type:
index_sched=Scheduled Monitoring
index_scheddesc=Turn scheduled checking of monitors on or off, and set the address to which failures are automatically emailed.
index_return=service list
index_none=No monitors are currently defined.
index_oldtime=Status from last scheduled check at $1
index_esnmp=The module is configured to send SNMP traps on the <a href='$3'>Module Config</a> page, but the $1 Perl module is not installed. <a href='$2'>Click here</a> to download and install it now.
index_refresh=Refresh Status
index_refreshdesc=Perform an immediate refresh of all monitor statuses, instead of waiting for the next scheduled update.
index_delete=Delete Selected
index_refsel=Refresh Selected
index_group=Members of $1
index_tmpls=Edit Email Templates
index_tmplsdesc=View and edit templates used to construct email messages sent when monitored services go down.

type_apache=Apache Webserver
type_inetd=Internet and RPC Server
type_xinetd=Extended Internet Server
type_squid=Squid Proxy Server
type_bind8=BIND DNS Server
type_dnsadmin=BIND 4 DNS Server
type_dhcpd=DHCP Server
type_tcp=Remote TCP Service
type_http=Remote HTTP Service
type_sslcert=SSL Certificate
type_ftp=Remote FTP Service
type_sendmail=Sendmail Server
type_postfix=Postfix Server
type_ping=Remote Ping
type_proc=Check Process
type_mysql=MySQL Database Server
type_postgresql=PostgreSQL Database Server
type_samba=Samba Servers
type_nfs=NFS Server
type_exec=Execute Command
type_file=Check File or Directory
type_traffic=Network Traffic
type_space=Disk Space
type_du=Directory Size
type_consume=Disk Space Consumption
type_load=Load Average
type_change=File or Directory Change
type_oldfile=File Not Changed
type_qmailadmin=QMail Server
type_mon=MON Service Monitor
type_jabber=Jabber IM Server
type_usermin=Usermin Webserver
type_portsentry=Portsentry Daemon
type_hostsentry=Hostsentry Daemon
type_webmin=Webmin Webserver
type_cfengine=Configuration Engine Daemon
type_memory=Free Memory
type_proftpd=ProFTPD Server
type_dovecot=Dovecot IMAP/POP3 Server
type_mailserver=Mailserver Response
type_sshd=SSH Server
type_raid=RAID Device Status
type_iface=Network Interface Status
type_sensors=LM Sensor Status
type_nut=NUT UPS Value
type_mailq=Mail Queue Size
type_dns=DNS Lookup
type_query=SQL Query
type_alive=Alive System
type_rssh=Remote SSH

mon_create=Create Monitor
mon_edit=Edit Monitor
mon_header=Monitor details
mon_header2=Commands to run
mon_header3=Monitored service options
mon_desc=Description
mon_remote=Run on host
mon_remotes2=Run on hosts and groups
mon_local=Local
mon_none=No remote servers defined
mon_nosched=Check on schedule?
mon_warndef=Yes, and use default reporting mode
mon_warn1=Yes, and report on status changes
mon_warn0=Yes, and report when going down
mon_warn2=Yes, and report when down
mon_warn3=Yes, but never report
mon_status=Current status
mon_up=Up
mon_down=Down
mon_webmin=Webmin Down
mon_timeout=Timed out
mon_not=Not installed
mon_ondown=If monitor goes down, run command
mon_onup=If monitor comes up, run command
mon_ontimeout=If monitor times out, run command
mon_clone=Module to monitor
mon_err=Failed to save monitor
mon_edesc=Missing description
mon_elogin=Invalid login for RPC on Webmin server $1
mon_eremote2=Webmin server $1 could not be contacted : $2
mon_estatus=Webmin server $1 does not have the System and Server Status module
mon_ecannot=You are not allowed to edit monitors
mon_ertype=This monitor type is not available on $1
mon_runon=Run commands on
mon_runon0=This server
mon_runon1=The remote host
mon_oninfo=Note: Commands will only be run when email is sent
mon_fails=Failures before reporting
mon_efails=Missing or invalid number of failures
mon_notify=Notification methods
mon_notifyemail=Email
mon_notifypager=Pager
mon_notifysnmp=SNMP
mon_notifysms=SMS
mon_email=Also send email for this service to
mon_depend=Don't check if monitor is down
mon_edepend=A monitor cannot depend on itself
mon_clone2=Clone
mon_skip=Skipped
mon_empty=No members
mon_onemem=One member
mon_members=$1 members
mon_enoremote=No hosts or groups to run on selected
mon_tmpl=Template for messages
mon_notmpl=None (use Webmin defaults)

sched_title=Scheduled Monitoring
sched_header=Scheduled background monitoring options
sched_mode=Scheduled checking enabled?
sched_email=Email status report to
sched_pager=Page status report to number
sched_none=Don't send email
sched_pnone=Don't send pages
sched_from=From: address for email
sched_int=Check every
sched_period_0=minutes
sched_period_1=hours
sched_period_2=days
sched_period_3=months
sched_period_4=weeks
sched_offset=with offset
sched_warn=Send email when
sched_warn1=When a service changes status
sched_warn0=When a service goes down
sched_warn2=Any time service is down
sched_single=Send one email per service?
sched_hours=Run monitor during hours
sched_days=Run monitor on days
sched_err=Failed to save scheduled monitoring
sched_eemail=Missing email address
sched_eint=Missing or invalid interval
sched_eoffset=Missing or invalid offset
sched_ehours=No hours to run during selected
sched_edays=No days to run on selected
sched_ecannot=You are not allowed to edit scheduled monitoring
sched_smtp=Send mail via
sched_smtp_prog=Local mail server
sched_smtp_server=SMTP server
sched_esmtp=Missing or invalid SMTP server
sched_esmtpcmd=SMTP command $1 failed : $2
sched_eemailserver=Your mail server is not installed : $1
sched_sms=Send SMS to
sched_smsno=Nobody
sched_smscarrier=Phone on carrier
sched_smsnumber=with number
sched_esmsnumber=Missing or non-numeric SMS number
sched_esmsname=Missing or invalid-looking SMS number

up_since=Up since $1
depends_mod=The module $1 is not installed on your system
depends_os=The module $1 is not supported on your system
depends_remote=The module $1 is not supported on server $2

tcp_host=Host to connect to
tcp_port=Port to connect to
tcp_alarm=Connection timeout
tcp_ehost=Missing or invalid hostname
tcp_eport=Missing or invalid port number
tcp_ealarm=Missing or invalid connection timeout

http_url=URL to request
http_alarm=Connection timeout
http_eurl=Missing or invalid URL
http_ealarm=Missing or invalid connection timeout
http_login=Login as
http_none=Don't authenticate
http_user=Username
http_pass=password
http_euser=Missing username
http_method=HTTP request method
http_regexp=Page must match regexp
http_eregexp=No regular expression for page to match entered
http_none2=Don't match
http_ehead=The HEAD request method cannot be used when checking for a regular expression

ping_host=Host to ping
ping_wait=Time to wait for response
ping_ehost=Missing or invalid hostname
ping_ewait=Missing or invalid wait time
ping_econfig=No ping command has been set in Module Config

proc_pid=Running with PIDs $1
proc_cmd=Command to check for
proc_not=Fail if process is
proc_not0=Not running
proc_not1=Running
proc_ecmd=Missing command
proc_thresh=Number of process that must exist for<br>monitor to consider them running
proc_ethresh=Missing or invalid number of processes
proc_asuser=Running as user
proc_anyuser=Any user
proc_easuser=User for process to run as does not exist

exec_cmd=Command to check exit status of
exec_ecmd=Missing command

file_file=File, directory or pattern to check
file_test=Test to perform
file_test_0=Must exist
file_test_1=Must not exist
file_test_2=Size must be bigger than
file_test_3=Size must be smaller than
file_bytes=bytes
file_efile=Missing file or directory name to check
file_esize=Invalid file size
file_elarge=Files too large : $1
file_esmall=Files too small : $1

traffic_iface=Interface to monitor
traffic_bytes=Maximum bytes/second
traffic_dir=Direction to monitor
traffic_dir0=Incoming and outgoing
traffic_dir1=Incoming only
traffic_dir2=Outgoing only
traffic_desc=This monitor keeps track of network traffic on a selected interface, and displays the monitor as down if the traffic exceeds the number of bytes per second entered below. This only really works well if scheduled monitoring is enabled at set to a short interval, like every 5 minutes.
traffic_eifaces=Your operating system does not have a /proc/net/dev file
traffic_ebytes=Missing or invalid number of bytes/second

space_fs=Filesystem to check
space_min2=Minimum free space
space_mode0=Absolute size
space_mode1=Percentage of total
space_desc=$1 free
space_nofs=Filesystem not mounted
space_other=Other..
space_emin=Missing or invalid free space
space_epc=Missing or invalid free space percentage
space_eother=Missing or invalid filesystem
space_inode=Minimum free Inodes
space_ierr=Only $1 inodes free
space_merr=Only $1 space free
space_perr=Only $1% free
space_dferr=Failed to get filesystem size

load_time=Load average to check
load_1=1 minute
load_5=5 minute
load_15=15 minute
load_max=Maximum load average
load_emax=Missing or invalid maximum load average
load_ecmd=The <tt>uptime</tt> command was not found on your system
load_efmt=The output of the <tt>uptime</tt> command could not be parsed

log_create=Created monitor $1
log_modify=Modified monitor $1
log_delete=Deleted monitor $1
log_sched=Changed scheduled monitoring
log_deletes=Deleted $1 monitors
log_tmpl_create=Created email template $1
log_tmpl_modify=Modified email template $1
log_tmpl_delete=Deleted email template $1
log_tmpl_deletes=Deleted $1 email templates
log_refresh=Refreshed monitor statuses

acl_edit=Can edit and create monitors?
acl_sched=Can change scheduled monitoring?

change_file=File or directory to monitor (fail if changed)

jabber_eparser=The Perl module $1 is not installed on your system.

memory_min2=Minimum free real memory
memory_emin=Missing or invalid amount of free real memory
memory_eproc=Webmin does not know how to check free memory on your operating system
memory_free2=$1 real memory free
memory_freeswap=$1 virtual memory free
memory_freelow=Only $1 real memory free
memory_freelowswap=Only $1 virtual memory free
memory_minswap=Minimum free virtual memory
memory_eminswap=Missing or invalid amount of free virtual memory

proftpd_etype=This monitor cannot be used when ProFTPD is run stand-alone

mailserver_to=Send email to address
mailserver_timeout=Timeout and interval
mailserver_units_0=Seconds
mailserver_units_1=Minutes
mailserver_units_2=Hours
mailserver_units_3=Days
mailserver_desc=The address below must be an autoresponder that replies to the source address with the same Subject: line.

oldfile_file=File to monitor (fail if not changed)
oldfile_diff=Fail if not changed for
oldfile_secs=secs

raid_device=RAID device
raid_edevice=No RAID device selected
raid_bad=Bad disk detected
raid_resync=Currently resyncing
raid_notfound=RAID device $1 not found
raid_other=Other..

iface_iface=Interface to check

refresh_title=Refresh Status
refresh_doing=Refreshing the status of all monitors ..
refresh_doing2=Refreshing the status of $1 selected monitors ..
refresh_done=.. done.

sensors_name=Sensor to check
sensors_value=Failed when
sensors_value0=System indicates warning
sensors_value1=Value is below $1
sensors_value2=Value is above $1
sensors_cmd=The command <tt>sensors</tt> is not installed on your system. This monitor requires the lm_sensors package be installed to operate.
sensors_none=No sensors were detected on your system. You may need to run the <tt>sensors-detect</tt> initialization command.
sensors_cur=$1 (currently $2 $3)
sensors_emin=Missing or invalid minimum value
sensors_emax=Missing or invalid maximum value

nut_ups=NUT UPS to check
nut_name=Attribute to check
nut_value=Failed when
nut_value1=Value is below $1
nut_value2=Value is above $1
nut_cmd=The command <tt>upsc</tt> is not installed on your system. This monitor requires the NUT package be installed and configured to operate.
nut_eups=No USP to check entered
nut_cur=$1 (currently $2)
nut_emin=Missing or invalid minimum value
nut_emax=Missing or invalid maximum value

mailq_system=Mail server
mailq_qmailadmin=Qmail
mailq_postfix=Postfix
mailq_sendmail=Sendmail
mailq_size=Maximum mail queue size
mailq_esize=Missing or invalid maximum queue size
mailq_toomany=Down - $1 messages queued
mailq_ok=Up - $1 messages queued

dns_server=DNS server
dns_host=Hostname to lookup
dns_address=Expected IP address
dns_eserver=Missing or invalid DNS server
dns_ehost=Missing or invalid-looking hostname to lookup
dns_eaddress=Missing or invalid expected IP address
dns_ecmds=Neither the <tt>nslookup</tt> or <tt>dig</tt> commands are installed on your system

monitor_sub_down=$1 down on $2
monitor_pager_down=$1: "$2" is down $3
monitor_snmp_down=$1: $2
monitor_email_down=Monitor on $1 for '$2' has detected that the service has gone down at $3
monitor_sub_up=$1 back up on $2
monitor_pager_up=$1: $2 is back up $3
monitor_snmp_up=$1: $2 is back up
monitor_email_up=Monitor on $1 for '$2' has detected that the service has gone back up at $3
monitor_sub_un=$1 uninstalled on $2
monitor_pager_un=$1: $2 uninstalled $3
monitor_snmp_un=$1: $2 uninstalled
monitor_email_un=Monitor on $1 for '$2' has detected that the service is uninstalled at $3
monitor_sub_webmin=$1 Webmin down on $2
monitor_pager_webmin=$1: $2 Webmin down $3
monitor_snmp_webmin=$1: $2 Webmin down
monitor_email_webmin=Monitor on $1 for '$2' has detected that Webmin is down at $3
monitor_sub_timed=$1 timed out on $2
monitor_pager_timed=$1: $2 timed out $3
monitor_snmp_timed=$1: $2 timed out
monitor_email_timed=Monitor on $1 for '$2' has timed out at at $3
monitor_sub_isdown=$1 down on $2
monitor_pager_isdown=$1: "$2" is down $3
monitor_snmp_isdown=$1: $2
monitor_email_isdown=Monitor on $1 for '$2' has detected that the service is down at $3
monitor_sub=Service monitor : $1
monitor_sub2=Service monitor
monitor_sub3=Service monitor : $1 services
monitor_run1=Running $1 on $2 ..
monitor_run2=Running $1 ..
monitor_runerr=Failed to run $1 on $2 : $3

deletes_egone=One of the selected monitors no longer exists
deletes_enone=No monitors selected

ftp_host=FTP server host
ftp_port=FTP port
ftp_user=Login as user
ftp_anon=Anonymous
ftp_pass=With password
ftp_file=File to fetch
ftp_none=None (just login)
ftp_ehost=Missing or invalid FTP server host
ftp_eport=Missing or invalid FTP server port
ftp_efile=Missing or invalid file to download
ftp_tls=Use TLS encryption?
ftp_etls=TLS cannot be enabled unless the $1 Perl module is installed
ftp_econn=TLS FTP connection failed
ftp_econn2=TLS FTP connection failed : $1
ftp_elogin=TLS FTP login failed : $1
ftp_etlsfile=TLS FTP download failed : $1

query_driver=SQL database type
query_db=Database name
query_host=Database server host
query_local=This server
query_user=Login as user
query_pass=Login with password
query_sql=SQL query to execute
query_result=Expected result
query_ignore=Ignore result
query_edriver=The Perl driver module $1 is not installed
query_edb=Missing or invalid database name
query_ehost=Missing or invalid database server hostname
query_euser=Invalid username
query_epass=Invalid password
query_esql=Missing SQL query
query_eresult=Missing expected result
query_elogin=Login failed : $1
query_eprepare=SQL error : $1
query_eexecute=SQL failed : $1
query_ewrong=Incorrect result : $1

consume_rate=Maximum consumption rate (per second)
consume_high=Consumption rate is $1 / second

alive_up=Up for $1

rssh_host=SSH server host
rssh_ruser=Login as user
rssh_rpass=Login with password
rssh_nopass=None required
rssh_nologin=Don't try to login
rssh_ehost=Missing or invalid SSH server host
rssh_eruser=Missing username
rssh_ecmd=The <tt>ssh</tt> command is not installed on your system
rssh_eproc=The Running Processes module is not supported on your system
rssh_wrongpass=Incorrect login
rssh_failed=Connection failed
rssh_error=SSH error
rssh_haspass=Password
rssh_port=SSH server port
rssh_eport=Missing or invalid port number

tmpls_title=Email Templates
tmpls_ecannot=You are not allowed to edit email templates
tmpls_none=No email templates have been defined yet. All alerts will be sent using the Webmin default messages.
tmpls_desc=Description
tmpls_email=Email message
tmpls_add=Add a new email template.
tmpls_return=templates list
tmpls_delete=Delete Selected Templates

tmpl_title1=Create Email Template
tmpl_title2=Edit Email Template
tmpl_header=Alert email template messages
tmpl_desc=Template description
tmpl_email=Email message
tmpl_sms=SMS message
tmpl_sms1=Webmin default
tmpl_sms0=Custom message below ..
tmpl_snmp=Pager message
tmpl_instr=Instructions and substitutions
tmpl_subs=The email, SMS and pager messages defined on this page can use the following substitutions :
tmpl_subs_desc=Service description
tmpl_subs_host=Host being monitored
tmpl_subs_date=Current date
tmpl_subs_time=Current time
tmpl_subs_status=Service status, such as <i>Down</i>
tmpl_subs2=In addition, you can use conditional blocks like : <tt>$1 Service is down $2 Service is OK $3</tt>
tmpl_err=Failed to save email template
tmpl_edesc=Missing template description
tmpl_emsg=Missing email message
tmpl_esms=Missing SMS message
tmpl_esnmp=Missing SNMP message
tmpl_err2=Failed to delete email template
tmpl_eusers=It is in use by the following monitors : $1

dtmpls_err=Failed to delete templates
dtmpls_enone=None selected
dtmpls_eusers=$1 is in use by the following monitors : $2

sslcert_src=Certificate location
sslcert_url=From HTTPS URL
sslcert_file=From file on server
sslcert_eurl=Missing, invalid or non-SSL URL
sslcert_efile=Missing or invalid certificate file
sslcert_ecert=Could not get certificate
sslcert_days=Days before expiry to fail
sslcert_when=When expired
sslcert_mismatch=Also detect hostname mismatch?
sslcert_edays=Missing or invalid number of days
sslcert_eopenssl=The <tt>openssl</tt> command is needed to check certificates
sslcert_estart=Not valid until $1
sslcert_eend=Not valid after $1
sslcert_left=Up - $1 days until expiry
sslcert_ematch=Hostname $1 does not match certificate $2
sslcert_emismatch=Certificate hostname checking can only be used when checking a URL

du_dir=Directory to monitor
du_max=Maximum size
du_edir=Missing or non-absolute directory path
du_emax=Missing or non-numeric maximum size
du_over=Size is $1
du_under=Size is only $1