index_title=Webmin Configuration
index_return=Webmin configuration
index_version=Webmin $1
index_boot=Start at boot time
index_bootmsg=Change this option to control whether Webmin is started at boot time or not. If it is not currently started at boot and Yes is chosen, a new init script will be created.
index_inetd=Because Webmin is currently being run by <tt>inetd</tt>, you probably do not want to enable this option.
index_apache=Because Webmin is currently running under Apache, you probably do not want to enable this option.
index_restart=Restart Webmin
index_restartmsg=Click this button to re-start the Webmin server process. This may be necessary if you have recently upgraded Perl.
index_refresh=Refresh Modules
index_refreshmsg=Re-check all Webmin modules for installed servers, and update those that appear in the 'Un-used modules' category.
access_title=IP Access Control
access_desc=The Webmin server can be configured to deny or allow access only from certain IP addresses using this form. Hostnames (like foo.bar.com) and IP networks (like 10.254.3.0 or 10.254.1.0/255.255.255.128 or 10.254.1.0/25 or 10.254.1.5-10.254.97.127 or 2001:DB8::A0BC:0001 or 2001:DB8::/32) can also be entered. You should limit access to your server to trusted addresses, especially if it is accessible from the Internet. Otherwise, anyone who guesses your password will have complete control of your system.
access_ip=Allowed IP addresses
access_local=Include local network in list
access_header=Access control options
access_all=Allow from all addresses
access_allow=Only allow from listed addresses
access_deny=Deny from listed addresses
access_libwrap=Also check TCP-wrappers <tt>hosts.allow</tt> and <tt>hosts.deny</tt> files?
access_err=Failed to update access list
access_enone=No addresses entered
access_enet='$1' is not a valid network address
access_emask='$1' is not a valid netmask
access_ecidr='$1' is not a valid CIDR number
access_eip='$1' is not a complete IP or network address
access_eip6='$1' is not a complete IPv6 or network address
access_ecidr6='$1' is not a valid IPv6 network size
access_ecidr8=IPv6 network size '$1' must be divisible by 8
access_ehost=Failed to find IP address for '$1'
access_eself=Your current IP address ($1) would be denied
access_always=Resolve hostnames on every request?
access_trust=Trust remote IP address provided by proxies?
bind_title=Ports and Addresses
bind_desc2=This form can be used to change the port number that Webmin listens on, or have it listen on only a single IP address on your system. You can also configure it to accept connections on multiple ports, or to listen on several IP addresses. Note - your web browser may prompt you to log in again after changing the port or binding address.
bind_header=IP addresses and ports
bind_sockets=Listen on IPs and ports
bind_firewall=Open new ports on firewall?
bind_sip=Bind to IP address
bind_sport=Listen on port
bind_sip1=Any address
bind_sip2=Only address..
bind_sport0=Same as first
bind_sport1=Specific port ..
bind_listen=Listen for broadcasts on UDP port
bind_none=Don't listen
bind_hostname=Web server hostname
bind_auto=Work out from browser
bind_err=Failed to change address
bind_enone=No IP addresses and ports to listen on entered
bind_eip2='$1' is not a valid IP address to bind to
bind_eport2='$1' is not a valid port number
bind_erestart=An error occurring starting Webmin with the new address and port settings : $1
bind_elisten=Missing or invalid port to listen for UDP broadcasts on
bind_ehostname=Missing or invalid web server hostname
bind_resolv_myname=Reverse-resolve connected IP address?
bind_ipv6=Accept IPv6 connections?
bind_eipv6=IPv6 cannot be enabled unless the $1 Perl module is installed
bind_redirecting=Redirecting to new URL ..
bind_elsof=New port $1 is already in use by another process
bind_eonsystem=The IP address $1 is not active on this system, and so cannot be used
bind_maxconns=Maximum total concurrent connections
bind_maxconns_per_ip=Maximum concurrent connections per IP
bind_maxconns_per_net=Maximum concurrent connections per network
bind_emaxconns=Maximum concurrent connections must be a number greater than 1
bind_emaxconns_per_ip=Maximum concurrent connections per IP must be a number greater than 1
bind_emaxconns_per_net=Maximum concurrent connections per network must be a number greater than 1
bind_maxlifetime=Maximum Webmin process lifetime
bind_maxlifetime_def=Unlimited
bind_maxlifetime_secs=seconds
bind_emaxlifetime=Maximum process lifetime must be a number greater than 60 seconds
log_title=Logging
log_desc=Webmin can be configured to write a log of web server hits, in the standard CLF log file format. If logging is enabled, you can also choose whether IP addresses or hostnames are recorded, and how often the log file is cleared. When enabled, logs are written to the file $1.
log_desc2=When logging is enabled, Webmin will also write a more detailed log of user actions to the file $1. This log can be viewed and analysed with the Webmin Actions Log module to see exactly what each Webmin user has been doing.
log_header=Webserver logging options
log_status=Logging active?
log_disable=Disable logging
log_enable=Enable logging
log_resolv=Log resolved hostnames?
log_clf=Use combined log format (including referrer and user agent)?
log_clear2=Periodically clear log files?
log_period=Yes, every $1 hours
log_forusers=Users to log Webmin actions for
log_uall=Log actions by all users
log_users=Only log actions by ..
log_inmods=Modules to log Webmin actions in
log_mall=Log actions in all modules
log_modules=Only log actions in ..
log_global=<Global actions>
log_sched=Log scheduled functions?
log_files=Log changes made to files by each action?
log_fullfiles=Record all modified files before actions, for rollbacks?
log_err=Failed to save logging options
log_ehours='$1' is not a valid number of hours
log_ediff=Your system does not have the command $1 needed for logging file changes
log_perms=Permissions for log files
log_eperms=Missing or invalid octal permissions (like 755)
log_syslog=Also log Webmin actions to syslog?
log_login=Include Webmin logins and logouts in actions log?
log_email=Send logged actions via email to
log_emailnone=Don't send
log_inmodsemail=Send email for actions in
proxy_title=Proxy Servers and Downloads
proxy_desc=If the host on which Webmin is running is behind a firewall of some kind, you may need to set the proxy server to use for accessing web and FTP sites. Certain modules, such as <tt>Software Packages</tt>, will use these proxies when downloading files or programs.
proxy_header=Proxy servers
proxy_http=HTTP proxy
proxy_ftp=FTP proxy
proxy_none=None
proxy_nofor=No proxy for
proxy_user=Username for proxy
proxy_pass=Password for proxy
proxy_err=Failed to save proxies
proxy_ehttp2=The HTTP proxy server must be entered as a URL, like $1
proxy_eftp2=The FTP proxy server must be entered as a URL, like $1
proxy_bind=Source IP address for HTTP connections
proxy_ebind=Missing or invalid source IP address
proxy_osdn=Preferred OSDN mirror for downloads
proxy_mirrordef=<Default (Let Sourceforge decide)>
proxy_mirrordef2=Default (Let Sourceforge decide)
proxy_other=Other..
proxy_eother=Missing or invalid-looking OSDN mirror code
proxy_desc2=When Webmin downloads a file from a URL hosted on sourceforge, it will automatically use the mirror site based on your selection below, where possible.
proxy_header2=Download sites
proxy_cache=Cache downloaded files?
proxy_cache1=No
proxy_cache0=Yes, in cache of size
proxy_ecache=Missing or invalid cache size
proxy_daysmax=Maximum time to cache files
proxy_daysdef=Forever
proxy_days=days
proxy_edays=Missing or invalid maximum number of days to cache files
proxy_mods=Do caching in modules
proxy_mods0=All modules
proxy_mods1=Only selected ..
proxy_mods2=All except selected ..
proxy_emods=No modules selected
proxy_clear=Clear Cache
proxy_cacheb=Manage Cached URLs
proxy_cachebdesc=Click this button to search for and manage URLs cached for download by Webmin.
proxy_cleardesc=Click this button to delete all $1 cached URLs downloaded by Webmin, so that future downloads are made direct from the origin HTTP server. $2 of disk space will be freed.
proxy_return=proxy servers and downloads
proxy_tabproxy=Proxying
proxy_tabdown=Downloading
proxy_fallback=Try direct request if proxy is down?
ui_title=User Interface
ui_desc=This form allows you to edit user interface options used by all modules. When entering colours, each must be specified using the standard RGB system, where each value is a hex number from 00 to ff.
ui_header=User interface options
ui_default=Default
ui_rgb=<font color=#ff0000>RR</font><font color=#00ff00>GG</font><font color=#0000ff>BB</font> hex color
cs_page=Page background
cs_text=Normal text
cs_table=Table background
cs_header=Table header
cs_link=Link text
ui_texttitles=Display titles as text?
ui_sysinfo=Display login and hostname (for non-framed themes)
ui_sysinfo0=At bottom of browser
ui_sysinfo1=In browser title
ui_sysinfo2=Above page heading
ui_sysinfo3=Nowhere
ui_sysinfo4=Instead of browser title
ui_err=Failed to save user interface options
ui_ergb=Invalid hexidecimal color value for '$1'
ui_feedback=Send feedback to
ui_feedbackmode=Allow sending of feedback?
ui_nice_size_type=Use binary units of measurement (KiB, MiB, GiB rather than KB, MB, GB)
ui_feednocc=Only to address above
ui_hostnamemode=Hostname to display in Webmin
ui_hnm0=Real hostname
ui_hnm1=Hostname from URL
ui_hnm2=Domain name from URL
ui_hnm3=Other name..
ui_feedbackconfig=Allow all users to include<br>configuration in feedback?
ui_width=Help window width
ui_height=Help window height
ui_ewidth=Missing or invalid help window width
ui_eheight=Missing or invalid help window height
ui_sizefile=File chooser size
ui_sizeuser=User chooser size
ui_sizeusers=Multiple users chooser size
ui_sizedate=Date selector size
ui_sizemodule=Module chooser size
ui_sizemodules=Multiple modules chooser size
ui_edbwidth=Missing or invalid chooser window width
ui_edbheight=Missing or invalid chooser window height
ui_showlogin=Prepend username to page titles?
ui_showhost=Prepend hostname to page titles?
ui_ehostnamedisplay=Missing or invalid display hostname
mods_title=Webmin Modules
mods_desc1=Webmin modules can be added after installation by using the form to the right. Modules are typically distributed in <tt>.wbm</tt> files, each of which can contain one or more modules. Modules can also be installed from RPM files if supported by your operating system.
mods_installsource=Install from
mods_grantto=Grant access to
mods_install=Install Module
mods_local=From local file
mods_uploaded=From uploaded file
mods_ftp=From HTTP or FTP URL
mods_third=Third party module from
mods_thsel=Select..
mods_nodeps=Ignore dependencies?
mods_nodeps2=Ignore module dependencies when deleting
mods_grant2=Grant access only to users and groups
mods_grant1=Grant access to all Webmin users
mods_checksig=Check signature file for downloaded modules?
mods_installok=Install Module
mods_desc2=If you wish to have more than one copy of the same module with different configurations, the form to the right allows you to clone any existing module. The clone will have a new name, a new module configuration, new access control options and may be made available to different users.
mods_clone=Clone Module
mods_cname=Module to clone
mods_cnew=Cloned module name
mods_ccat=Assign to category
mods_csame=Same as original
mods_creset=Reset configuration to default?
mods_cloneok=Clone Module
mods_desc3=Existing modules and clones of modules can be deleted, they will also be removed. Once a module has been deleted it must be reinstalled before you can use it again. A module cannot be deleted if other modules depend on it.
mods_delete=Delete Modules
mods_deleteok=Delete Selected Modules
mods_eroot=Webmin modules cannot be installed or managed when the Webmin code is shared with another system, such as when it is running inside a Zone or mounted via NFS.
mods_desc4=Installed modules can be exported as a wbm.gz file using the form below. A module file can then be installed onto another system running Webmin.
mods_header4=Module export options
mods_exportmods=Modules to export
mods_exportto=Export to
mods_exportfile=File on server $1
mods_exportshow=Download in browser
mods_export=Export Modules
mods_exportok=Export Selected Modules
mods_return=modules form
mods_tabinstall=Install
mods_tabclone=Clone
mods_tabdelete=Delete
mods_tabexport=Export
install_err1=Failed to install module from $1
install_efile=File does not exist
install_err2=Failed to install uploaded module
install_ebrowser=Your browser does not support file uploads
install_err3=Failed to install module from $1
install_eurl=Invalid URL
install_etar=Not a valid module file : $1
install_enotar=The <tt>tar</tt> command, needed for extracting Webmin modules, was not found on your system
install_einfo=Module $1 is missing a module.info file
install_enone=File does not appear to contain any modules
install_eos=Module $1 does not support this operating system ($2 $3)
install_eusermin=Module $1 is for Usermin, not Webmin
install_ever=Module $1 requires Webmin version $2 or above
install_edep=Module $1 requires module $2
install_edep2=Module $1 requires at least version $3 of module $2
install_eperldep=Module $1 requires Perl module $2.<br>However, you can have Webmin <a href='$3'>download and install</a> the Perl module for you.
install_eextract=Extract failed : $1
install_title=Install Module
install_desc=The following modules have been successfully installed and added to your access control list :
install_line2=<a href='$5'>$1</a> in $2 ($3 kB) under category $4
install_line3=$1 in $2 ($3 kB), hidden from view
install_ecomp=File is compressed, but the $1 command was not found on your system
install_ecomp2=Failed to uncompress file : $1
install_egzip=File is gzipped, but the $1 command was not found on your system
install_egzip2=Failed to gunzip file : $1
install_ebunzip=File is bzipped, but the $1 command was not found on your system
install_ebunzip2=Failed to bunzip file : $1
install_erpm=Not a Webmin module or theme RPM
install_eirpm=RPM install failed : $1
install_cat=Under category $1.
install_eneither=RPM does not contain a webmin module or theme
install_err4=Failed to install standard module
install_emissing=The specified module does not exist
clone_err=Failed to clone module
clone_elink=symlink failed : $1
clone_ecopy=failed to copy config : $1
clone_desc=Clone of $1
delete_err=Failed to delete modules
delete_edep=Module $1 cannot be deleted, as the module $2 depends on it
delete_desc1=$1 (Clone of $2)
delete_desc2=$1 in $2 ($3 kB)
delete_title=Delete Modules
delete_msg=The following modules have been successfully deleted from your Webmin installation :
delete_rusure=Are you sure you want to delete the module(s) $2 ? $1 kB of files will be deleted forever.
delete_rusure2=Are you sure you want to delete the theme $2 ? $1 kB of files will be deleted forever.
delete_rusure3=Are you sure you want to delete the module clones(s) $2 ?
delete_acls=Remove from users and reset access control settings?
delete_enone=No modules selected
os_title=Operating System and Environment
os_desc3=This page displays the operating system detected by Webmin at install time, and the system that is currently detected. If they are different, you can choose to have Webmin's OS information updated, which may be necessary if you have recently upgraded.
os_desc2=You can also change the search path used by Webmin when running programs, and the shared library path passed to any programs.
os_header=Host operating system
os_webmin=Operating system according to Webmin
os_iwebmin=Internal OS code used by Webmin
os_detect=Detected operating system
os_cannot=Cannot detect OS and version
os_update=Update Webmin to use detected OS
os_new=New operating system
os_path=Program search path
os_syspath=Include system's own search path?
os_ld_path=Library search path
os_perllib=Extra Perl library paths
os_envs=Additional environment variables
os_name=Variable name
os_value=Value
os_eversion=Missing operating system version
os_eiversion=Missing internal operating system version
os_incorrect=Operating system $1 has been upgraded to version $2
os_release_notes=Release notes
os_fix=Update Detected Operating System
os_usermin=Also update Usermin OS
lang_title=Language and Locale
lang_title2=Webmin Language and Locale
lang_lang=Language
lang_locale=Locale
lang_intro=This page allows you to choose which language Webmin will use for displaying titles, prompts and messages
lang_ok=Change Language
lang_accept=Use language specified by browser?
lang_charset=Character set for HTML pages
lang_chardef=Determined by language
lang_charover=Force character set
lang_err=Failed to save language
lang_echarset=Missing or invalid-looking character set
lang_dateformat=Dates format
lang_dateformat_dd/mon/yyyy=dd/mon/yyyy (i.e. 16/Sep/2001)
lang_dateformat_dd/mm/yyyy=dd/mm/yyyy (i.e. 16/09/2001)
lang_dateformat_mm/dd/yyyy=mm/dd/yyyy (i.e. 09/16/2001)
lang_dateformat_yyyy/mm/dd=yyyy/mm/dd (i.e. 2001/09/16)
ssl_title=SSL Encryption
ssl_essl=The Net::SSLeay perl module does not appear to be installed on your system. To install the OpenSSL library and Net::SSLeay, follow <a href='$1'>these instructions</a> from the Webmin website.
ssl_cpan=Alternately, you can have Webmin <a href='$1'>download and install</a> the required Net::SSLeay Perl module for you.
ssl_emessage=The error message from Perl was : $1
ssl_desc1=The host on which Webmin is running appears to have the SSLeay Perl module installed. Using this, Webmin supports SSL encrypted communication between your browser and the server. If you are accessing your Webmin server over the Internet, then you should definitely consider using SSL to prevent an attacker capturing your Webmin password.
ssl_desc2=Warning - only turn on SSL support if you have a browser that supports SSL, and there is no firewall blocking <b>https</b> requests between your browser and the Webmin host.
ssl_header=SSL support
ssl_on=Enable SSL?
ssl_key=Private key file
ssl_cert=Certificate file
ssl_cert_def=Same file as private key
ssl_cert_oth=Separate file
ssl_deny=SSL protocol versions to reject
ssl_compression=Allow compressed SSL connections?
ssl_honorcipherorder=Force use of server-defined cipher order?
ssl_extracas=Additional certificate files<br>for chained certificates
ssl_hsts=Enforce SSL with HSTS header
ssl_redirect=Redirecting after protocol change ..
ssl_extracasdef=Same as global SSL settings
ssl_extracasnone=None for this IP address
ssl_extracasbelow=Entered below ..
ssl_err=Failed to save SSL options
ssl_ekey=The SSL private key file $1 does not exist
ssl_ekey2=The SSL private key file $1 does not contain a PEM format key
ssl_ecert=The SSL certificate file $1 does not exist
ssl_ecert2=The SSL certificate file $1 does not contain a PEM format certificate
ssl_newkey=This form can be used to create a new SSL key and certificate for your Webmin server.
ssl_newcsr=This form can be used to create a new SSL key and certificate signing request (CSR) for your Webmin server. The CSR must be signed by a certificate authority (CA) before it can be used.
ssl_hole=Because you are currently using the default Webmin SSL key that everyone has access to, you should generate a new key immediately. Otherwise your SSL connection is not secure!
ssl_header1=Create SSL key
ssl_header2=Create SSL CSR
ssl_create=Create Now
ssl_cn=Server names
ssl_all=Any hostname
ssl_newfile=Write key to file
ssl_csrfile=Write CSR to file
ssl_usenew=Use new key immediately?
ssl_size=SSL key size
ssl_custom=Custom size
ssl_bits=bits
ssl_eextraca=Additional certificate file '$1' does not exist
ssl_days=Days before expiry
ssl_ipkeys=This section lists additional SSL certificates that will be used for connections to particular IP addresses.
ssl_ips=IP addresses and domain names
ssl_ipkeynone=No IP-specific SSL keys have been defined yet.
ssl_addipkey=Add a new IP-specific SSL key.
ssl_return=SSL keys
ssl_version=SSL protocol version
ssl_no2=Allow SSL version 2 browsers?
ssl_cipher_list=Allowed SSL ciphers
ssl_strong=Only strong PCI-compliant ciphers
ssl_pfs=Only strong ciphers with perfect forward secrecy
ssl_clist=Listed ciphers
ssl_ecipher_list=Missing or invalid cipher list - must be like <tt>HIGH:-SSLv2:-aNULL</tt>
ssl_auto=Detect automatically
ssl_eversion=Missing or invalid version number
ssl_edhparams=Failed to generate PFS DH params file : $1
ssl_epfsversion=PFS requires Net::SSLeay version $2, but this system only has version $1
ssl_saveheader=Upload existing key
ssl_privkey=Private key text
ssl_fromcsr=This private key was generated using the <b>Certificate Signing Request</b> tab. You should enter the certificate below that was supplied by your CA in response to the CSR.
ssl_privcert=Certificate text
ssl_privchain=Chained certificate text
ssl_nochain=No chained certificate
ssl_leavechain=Use existing chained certificate
ssl_upload=Or from upload file
ssl_same=Combined with private key
ssl_below=Entered below ..
ssl_savekey=This form allows you to upload an existing PEM format SSL private key and certificate for your Webmin server to use.
ssl_tabssl=SSL Settings
ssl_tabips=Per-IP Certificates
ssl_tabcreate=Self-Signed Certificate
ssl_tabcsr=Certificate Signing Request
ssl_tabupload=Upload Certificate
ssl_tabcurrent=Current Certificate
ssl_tablets=Let's Encrypt
ssl_cheader=Details of current certificate
ssl_typeself=Self-signed
ssl_typereal=Signed by CA
ssl_download=Download certificate
ssl_pem=PEM format
ssl_pkcs12=PKCS12 format
ssl_current=This section shows the details of the current Webmin SSL certificate, and allows it to be downloaded so that it can be accepted by your browser.
ssl_edownload=Failed to extract PEM data from certificate
ssl_csralready=View most recent key and CSR ..
ssl_already1=Previously generated private key :
ssl_already2=Previously generated certificate signing request :
ssl_letsdesc=Let's Encrypt is a free, automated, and open certificate authority that can be used to generate an SSL certificate for use by Webmin.
ssl_letserr=Unfortunately, Let's Encrypt cannot be used on your system : $1.
ssl_letserr2=Alternately, check the <a href='$1'>module configuration</a> page to ensure you are using the correct path to the <tt>letsencrypt</tt> command.
ssl_letsdesc2=This page can be used to request a new certificate, which will overwrite any other currently have configured in Webmin. However, the Let's Encrypt service requires that your ownership of the certificate domain be validated by checking that this system hosts the website for the domain. This is done by placing a small temporary file in the website's document directory.
ssl_letsheader=Options for new SSL certificate
ssl_letsdoms=Hostnames for certificate
ssl_webroot=Website root directory for validation file
ssl_webroot0=Apache virtual host matching hostname
ssl_webroot1=A different Apache virtual host
ssl_webroot2=Other directory
ssl_webroot3=Use DNS domains for validation
ssl_letsok=Request Certificate
ssl_letsonly=Just Update Renewal
ssl_usewebmin=Copy new key and certificate to Webmin?
ssl_letsrenew=Months between automatic renewal
ssl_letsnotrenew=Only renew manually
ssl_staging=Let's Encrypt server
ssl_staging0=Real
ssl_staging1=Staging (test only)
newkey_err=Failed to create SSL key
newkey_ecn=Missing or invalid server name
newkey_ecns=No server names entered
newkey_efile=Missing key file name
newkey_title=Generate Key
newkey_ecmd=The SSL command $1 was not found on your system. Either it is not installed, or the <a href='$2'>Webmin Users module configuration</a> is incorrect.
newkey_essl=An error occurred generating a new key :
newkey_ecat=An error occurred writing to the new key file :
newkey_ok=Successfully generated the following SSL key :
newkey_esize=Missing or invalid key size
newkey_edays=Missing or invalid number of days before expiry
newkey_ecountry=Country code must be two letters
newcsr_err=Failed to create SSL CSR
newcsr_efile=Missing CSR file name
newcsr_title=Generate CSR
newcsr_ok=Successfully generated the following SSL certificate request :
newcsr_ok2=This CSR must be sent to a signing authority, who will return a signed certificate. This can be installed with the key above using the <b>Upload certificate</b> tab.
startpage_title=Index Page Options
startpage_intro2=This page allows you to control the appearance of the main Webmin menu. Some options may only be effective when using the old themes.
startpage_tabs=Categorize modules?
startpage_nocol=Number of columns
startpage_alt=Use alternative header?
startpage_ecols='$1' is not a valid number of columns
startpage_gotoone=Go direct to module if user only has one?
startpage_deftab=Default category
startpage_nohost=Show version, hostname and OS in title?
startpage_gotonone=<None>
startpage_gotomodule=After login, always go to module
startpage_webminup=Show Webmin updates on System Information page?
startpage_moduleup=Show module updates on System Information page?
upgrade_title=Upgrade Webmin
upgrade_desc=This form allows you to upgrade your entire Webmin installation to a new version. You can install from a local file, an uploaded file or from the latest version at <a href=http://www.webmin.com/>www.webmin.com</a>. Just as with a manual upgrade, all your config settings and third-party modules will be kept.
upgrade_descrpm=This form allows you to upgrade your entire webmin installation to a new version using RPM's upgrade option. You can install from a local RPM file, an uploaded file or from the latest version at <a href=http://www.webmin.com/>www.webmin.com</a>. Just as with a manual upgrade, all your config settings and third-party modules will be kept.
upgrade_descdeb=This form allows you to upgrade your entire Webmin installation to a new version by upgrading its Debian package. You can install from a local .deb file, an uploaded file or from the latest version at <a href=http://www.webmin.com/>www.webmin.com</a>. Just as with a manual upgrade, all your config settings and third-party modules will be kept.
upgrade_descsolaris-pkg=This form allows you to upgrade your entire Webmin installation to a new version by removing the current Solaris package and installing a new one. You can install from a local Solaris package file, an uploaded file or from the latest version at <a href=http://www.webmin.com/>www.webmin.com</a>. Just as with a manual upgrade, all your config settings and third-party modules will be kept.
upgrade_descsun-pkg=This form allows you to upgrade your entire Webmin installation to a new version from the Solaris package supplied by Sun. You can install from a local Solaris package file, or an uploaded file. The latest packages can be found at <a href=http://www.sun.com/bigadmin/content/webmin/>http://www.sun.com/bigadmin/content/webmin/</a>. Just as with a manual upgrade, all your config settings and third-party modules will be kept.
upgrade_descgentoo=This form allows you to upgrade your entire Webmin installation to a new version by removing the current Gentoo Emerge package and installing a new one. You can install from a local Gentoo package file, an uploaded file or from the latest version in the Emerge repository. Just as with a manual upgrade, all your config settings and third-party modules will be kept.
upgrade_local=From local file
upgrade_uploaded=From uploaded file
upgrade_url=From FTP or HTTP URL
upgrade_ftp=Latest version from www.webmin.com
upgrade_cup=Latest version from Caldera's <tt>cupdate</tt> tool
upgrade_emerge=Latest version from Emerge repository
upgrade_delete=Delete old version's directory after upgrade?
upgrade_ok=Upgrade Webmin
upgrade_err1=Failed to upgrade from $1
upgrade_err2=Failed to upgrade from uploaded file
upgrade_err3=Failed to upgrade from www.webmin.com
upgrade_err4=Failed to upgrade from Emerge repository
upgrade_err5=Failed to upgrade from URL $1
upgrade_eurl=Missing or invalid URL
upgrade_efile=File does not exist
upgrade_ebrowser=Your browser does not support file uploads
upgrade_eversion=Cannot downgrade to version $1
upgrade_elatest=You are already running the latest version of Webmin
upgrade_erpm=Not a valid Webmin RPM file
upgrade_edeb=Not a valid Webmin Debian package file
upgrade_egunzip=Your system does not have the <tt>gunzip</tt> command
upgrade_egzip=Failed to gunzip file : $1
upgrade_etar=Not a valid Webmin tar file
upgrade_euntar=Failed to untar file : $1
upgrade_emod=File is a Webmin module, not a complete Webmin upgrade. You may want to use the <a href='$1'>Webmin Modules</a> page to install it.
upgrade_setup=Running <tt>setup.sh</tt> script to upgrade Webmin ..
upgrade_setuprpm=Running <tt>RPM</tt> to upgrade Webmin ..
upgrade_setupdeb=Running <tt>DPKG</tt> to upgrade Webmin ..
upgrade_setuppackage=Running <tt>pkgadd</tt> to upgrade Webmin ..
upgrade_esolaris=Webmin's upgrade feature does not currently work when you have installed from a Solaris package. Please upgrade manually instead.
upgrade_ezip=Webmin's upgrade feature does not currently work when you have installed on Windows. Please upgrade manually instead.
upgrade_eportage=Webmin's upgrade feature does not currently work when you have installed from a Portage package. Please upgrade using the Portage tools instead.
upgrade_eusermin=File is Usermin version $1, not a Webmin update.
upgrade_updates=There are $1 updates for this new version of Webmin. <a href='$2'>Click here</a> to automatically download and install them now.
upgrade_epackage=Not a valid Solaris package
upgrade_ewpackage=Not a valid Solaris package for Webmin
upgrade_egentoo=Not a valid Gentoo package of Webmin
upgrade_eupdates=Failed to download list of updates : $1
upgrade_echecksig=RPM signature verification failed : $1
upgrade_nosig=No package signature verification done - checking of tar.gz packages is only possible when upgrading from www.webmin.com.
upgrade_sig=Check GnuPG signature on package?
upgrade_force=Upgrade even if new version is the same or older?
upgrade_disc=Disconnect all other users?
upgrade_edownsig=Failed to download signature : $1
upgrade_everify2=Package has signature from $1, but it is not valid
upgrade_everify3=Public key with ID $1 is not available for verification
upgrade_everify4=Failed to verify signature : $1
upgrade_sigok=Package signature verified successfully.
upgrade_nocheck=No package signature verification done.
upgrade_only=Don't re-install deleted or new modules?
upgrade_eroot=Webmin cannot be upgraded when its code is shared with another system, such as when it is running inside a Zone or mounted via NFS.
upgrade_tabupgrade=Upgrade Webmin
upgrade_tabgrants=New module grants
upgrade_tabupdate=Update modules
upgrade_tabsched=Scheduled update
upgrade_src=Upgrade Webmin from
upgrade_opts=Upgrade options
newmod_desc=When Webmin is upgraded, any new modules in the new version will be granted to one or more users. This form allows you to set the users who receive new modules. This setting will apply when upgrading at the command line or using the form above.
newmod_header=New module grants
newmod_def=Default behavior - grant new modules to <tt>root</tt> or <tt>admin</tt>
newmod_users=Grant new modules to :
update_desc1=This form allows you to upgrade Webmin modules that have been found to contain bugs or security holes from the <a href=http://www.webmin.com/updates.html>Webmin Updates</a> page or from another source. This will compare the currently installed modules with those available for update, and optionally automatically download and install any modules that are out of date.
update_header1=Update modules now
update_header2=Update modules on schedule
update_webmin=Update from www.webmin.com
update_other=Update from other sources ..
update_show=Only show which modules would be updated
update_missing=Install modules that are not currently installed
update_third=Update non-core modules as well
update_checksig=Check signatures on non-Webmin repositories
update_quiet=Only report when an update is done
update_ok=Update Modules
update_email=Email update report to
update_user=Login to update server
update_pass=Password for update server
update_enabled=Scheduled updating currently enabled
update_apply=Save and Apply
update_sched2=Update modules at $1:$2 every $3 days
update_none=No Webmin updates for this version.
update_failed=Failed to install module : $1
update_desc2=This form is for scheduling the automatic update of Webmin modules containing bugs or security holes from the <a href=http://www.webmin.com/updates.html>Webmin Updates</a> page or from another source. While this service is useful, you should be careful using it as it may allow attackers to take over your system if the update server was ever compromised.
update_enosig=Could not download signature file for updates : $1
update_ebadsig=Updates signature check failed : $1
update_enomodsig=Could not download signature file for module : $1
update_ebadmodsig=Module signature check failed : $1
update_src=Upgrade modules from
update_opts=Module update options
ca_title=Certificate Authority
ca_old=Existing certificate
ca_header1=Create new CA certificate
ca_header2=Edit CA certificate
ca_newmsg1=Your Webmin server is already setup as a certificate authority. You can use this form to set it up again, but any certificates already issued to users will no longer work.
ca_newmsg2=This form should be used to setup your Webmin server as a certificate authority (CA) so that users can request certificates in the Webmin Users to identify themselves to the server without having to login.
ca_cn=Domain name
ca_alt=Additional domains
ca_email=Email address
ca_ou=Department
ca_o=Organization
ca_sp=State
ca_c=Country code
ca_city=City or locality
ca_issuer_cn=Issuer name
ca_issuer_o=Issuer organization
ca_issuer_email=Issuer email address
ca_type=Certificate type
ca_notafter=Valid until
ca_create=Setup Certificate Authority
ca_oldmsg1=The CA certificate this server is using is displayed below. You may change it by pasting in the certificate from another CA, but any certificates already issued to users will no longer work.
ca_oldmsg2=If you have already setup a CA on another Webmin server, you can paste its certificate below instead of setting up a new CA. This will allow users from the other server to be recognised by this server as well.
ca_err=Failed to setup certificate authority
ca_setupok=Your certificate authority has been setup successfully. Users can now use the Webmin Users module to request certificates for themselves.
ca_stop=Shutdown certificate authority
ca_stopmsg=Click this button to stop Webmin from accepting existing certificates or issuing new ones. This will force users to use username and password authentication instead.
ca_stopok=Your certificate authority has been successfully shut down.
ca_eminiserv=SSL client certificates are only supported under miniserv.
ca_eversion=The version of the Perl Net::SSLeay module installed on your system does not support SSL client certificates.
ca_essleay=The SSL administration command $1 was not found on your system. You may need to change the path in the Webmin Users module configuration.
ca_essl=SSL certification can only be setup when the webserver is running in SSL mode.
session_title=Authentication
session_desc1=When enabled, password timeouts protect your Webmin server from brute-force password cracking attacks by adding a continuously expanding delay between each failed login attempt for the same user.
session_header=Authentication and session options
session_ptimeout=Password timeouts
session_pdisable=Disable password timeouts
session_penable=Enable password timeouts
session_pblock=Failed login blocks
session_blockhost=Block hosts with more than $1 failed logins for $2 seconds.
session_blockuser=Block users with more than $1 failed logins for $2 seconds.
session_syslog3=Log failures to <tt>syslog</tt>?
session_stype=Authentication type
session_sopts=Authentication options
session_disable=Disable session authentication
session_enable=Enable session authentication
session_local=Local authentication
session_localoff=Always require username and password
session_localon=Allow login without password for matching users from localhost
session_logouttime=Auto-logout after $1 minutes of inactivity
session_locking=Enable locking in Webmin
session_err=Failed to save authentication
session_elogouttime=Missing or invalid logout time
session_eblockhost_time=Missing or invalid blocking time
session_eblockhost_failures=Missing or invalid blocking logins
session_eblockuser_time=Missing or invalid user blocking time
session_eblockuser_failures=Missing or invalid user blocking logins
session_ecookie=Your browser does not support cookies, which are required for session authentication
session_elsof=Local authentication requires the <tt>lsof</tt> program
session_remember=Offer to remember login permanently?
session_ip=Limit sessions to the same client IP address?
session_hostname=Show hostname on login screen?
session_utmp=Record logins and logouts in <tt>utmp</tt>?
session_realname=Show real hostname instead of name from URL?
session_pam=Password source
session_pamon=Use PAM for Unix authentication, if available
session_pamoff=Never use PAM for Unix authentication
session_pfile=If PAM is unavailable or disabled, read users and passwords from file $1 columns $2 and $3
session_popts=Password options
session_pamconv=Support full PAM conversations?
session_pamend=Pass on PAM status to other modules?
session_cmddef=Expired password change
session_cmddef1=Change expired passwords via PAM
session_cmddef0=Change passwords with command:
session_ecmd=Missing or invalid password change command
session_epasswd_file=Invalid unix users file
session_epasswd_uindex=Missing or invalid unix username index
session_epasswd_pindex=Missing or invalid unix password index
session_banner=Pre-login banner
session_banner1=No pre-login page
session_banner0=Show pre-login file
session_ebanner=Missing or invalid pre-login file
session_extauth=External squid-style authentication program
session_eextauth=Missing or invalid external authentication program
session_pmodedesc3=Password expiry policy
session_pmode0=Always deny users with expired passwords
session_pmode1=Always allow users with expired passwords
session_pmode2=Prompt users with expired passwords to enter a new one
session_md5=Webmin password hashing format
session_md5off=Determine automatically
session_md5on=Use <tt>MD5</tt> hashing format
session_sha512=Use <tt>SHA512</tt> hashing format
session_yescrypt=Use <tt>yescrypt</tt> hashing format
session_emd5mod=MD5 hashing format cannot be used, as Perl $1 module is not installed
session_esha512mod=SHA512 hashing format cannot be used, as Perl $1 module is not installed
session_eyescrypt=yescrypt hashing format cannot be used, as Perl $1 module is not installed
session_blocklock=Also lock users with failed logins
session_passapi=Enable remote password change API?
session_passapi0=API disabled
session_passapi1=API enabled for Unix users
session_passurl=When enabled, user passwords can be changed via a POST request to $1
assignment_title=Reassign Modules
assignment_header=Module category assignments
assignment_ok=Change Categories
assignment_desc=This form allows you to configure which category each module is displayed under on the Webmin index page.
categories_title=Edit Categories
categories_header=Category ID and descriptions
categories_desc=This form allows you to rename the existing Webmin categories and create new ones to assign modules to. The top part of the table is for changing the descriptions of the built-in categories, while the bottom part is for adding new category IDs and descriptions.
categories_ok=Save Categories
categories_err=Failed to save categories
categories_edesc=Missing description for $1
categories_ecat=Category ID $1 is already taken
categories_code=ID
categories_name=Displayed description
categories_lang=Edit categories in language:
categories_langok=Change
categories_custom=Custom
log_access=Changed IP access control
log_bind=Changed port and address
log_log=Changed logging options
log_proxy=Changed proxy servers
log_osdn=Changed download options
log_ui=Changed user interface options
log_install=Installed module $1
log_tinstall=Installed theme $1
log_clone=Cloned module $1 to $2
log_delete=Deleted module $1
log_os=Changed operating system
log_lang=Changed global language
log_startpage=Changed index page options
log_upgrade=Upgraded Webmin to version $1
log_session=Changed authentication options
log_twofactor=Changed two-factor authentication options
log_ssl=Changed SSL encryption mode
log_newkey=Created new SSL key
log_newcsr=Created new SSL CSR
log_setupca=Set up certificate authority
log_changeca=Changed certificate authority
log_stopca=Shut down certificate authority
log_assignment=Changed module categories
log_categories=Changed category names
log_theme=Change theme to $1
log_mobile=Changed mobile device options
log_theme_def=Changed theme to Webmin default
log_referers=Changed trusted referrers
log_descs=Changed module titles
log_advanced=Changed advanced options
log_web=Changed web server options
log_osdnclear=Cleared download cache
log_savekey=Uploaded existing SSL key
log_deletecache=Deleted $1 URLs from cache
log_clearcache=Cleared all URLs from cache
log_lock=Changed file locking
log_sendmail=Changed mail sending options
log_debug=Changed debugging log file options
log_delete_webmincron=Deleted $1 scheduled functions
log_run_webmincron=Ran $1 scheduled functions
log_save_webmincron=Updated scheduled function in module $1
log_onedelete_webmincron=Deleted scheduled function in module $1
log_letsencrypt=Requested new SSL certificate from Let's Encrypt
log_letsencryptdns=Created Let's Encrypt DNS record for $1
log_letsencryptcleanup=Removed Let's Encrypt DNS record for $1
themes_title=Webmin Themes
themes_desc=Themes control the appearance of the Webmin user interface, including icons, colours, backgrounds and the layout of pages. The selection box below can be used to choose one of the themes installed on your system.
themes_sel=Current theme :
themes_default=Legacy Theme
themes_none=None - let theme decide
themes_change=Change
themes_overdesc=Overlays modify the appearance of a theme, by changing the colors, backgrounds and icons. They do not change the layout.
themes_overlay=Current overlay :
themes_installdesc=Use the form below to install a new Webmin theme on your system. Themes are typically distributed in <tt>.wbt</tt> files, but can also be installed from RPM files if supported by your operating system.
themes_installok=Install Theme
themes_tabchange=Change theme
themes_taboverlay=Change overlay
themes_tabinstall=Install theme
themes_tabdelete=Delete themes
themes_tabexport=Export themes
themes_err1=Failed to install theme from $1
themes_efile=File does not exist
themes_err2=Failed to install uploaded theme
themes_ebrowser=Your browser does not support file uploads
themes_err3=Failed to install theme from $1
themes_eurl=Invalid URL
themes_etar=Not a valid theme file : $1
themes_einfo=Theme $1 is missing a theme.info file
themes_enone=File does not appear to contain any themes
themes_eextract=Extract failed : $1
themes_done=The following themes have been successfully installed on your system :
themes_line=$1 in $2 ($3 kB)
themes_ecomp=File is compressed, but the $1 command was not found on your system
themes_ecomp2=Failed to uncompress file : $1
themes_egzip=File is gzipped, but the $1 command was not found on your system
themes_egzip2=Failed to gunzip file : $1
themes_erpm=Not a Webmin theme RPM
themes_eirpm=RPM install failed : $1
themes_ok=Theme changed successfully .. redirecting to the Webmin index page.
themes_ok2=Theme overlay changed successfully .. redirecting to the Webmin index page.
themes_delete=This form can be used to delete one of the themes installed on your system that is not currently in use.
themes_delok=Theme to delete :
themes_return=themes list
themes_err4=Failed to change overlay theme
themes_eoverlay=Selected overlay is not compatible with the current global theme
themes_desc4=Installed themes can be exported as a wbt.gz file using the form below. A theme file can then be installed onto another system running Webmin.
themes_exportmods=Themes to export
themes_exportok=Export Selected Themes
referers_title=Trusted Referrers
referers_desc=This page allows you to configure Webmin's referrer checking support, which is used to prevent malicious links from other websites tricking your browser into doing dangerous things with Webmin. However, if you have links to Webmin from your own websites that you don't want to be warned about you should add those sites to the list below.
referers_list=Trusted websites
referers_none=Trust links from unknown referrers
referers_none2=WARNING: This opens your system up to XSS attacks!
referers_referer=Referrer checking enabled?
referers_err=Failed to save referers
referers_ehost='$1' is not a valid trusted hostname
update_err=Failed to update modules
update_eurl=Missing or invalid update URL
update_title=Update Modules
update_info=Updating Webmin modules ..
update_mmissing=Module $1 is not installed on this system.
update_malready=Module $1 is already up to date.
update_mshow=Update needed for module $1 to version $2.
update_mok=Updating module $1 to version $2.
update_fixes=Fixes problem
update_mdesc=Installed module $1 ($2 kB)
update_mos=Update to module $1 is not needed on your system.
update_mtype=Module $1 cannot be updated as it was installed from a $2 package
update_efile=Invalid module updates source file
update_ehour=Missing or invalid hour to update on
update_emins=Missing or invalid minute to update on
update_edays=Missing or invalid number of days
update_rv=Checking for updated Webmin modules from $1
update_eemail=You must enter an email address if only showing what would be updated.
update_subject=Webmin modules update report
update_version=A new release of Webmin (version $1) is now available for download. Future updates will be released only for the latest version.
anon_title=Anonymous Module Access
anon_desc=This page allows you to grant access to selected Webmin modules and paths without clients needing to login. For each module path that you enter below (such as <tt>/custom</tt> or <tt>/passwd</tt>) you must also enter the name of a Webmin user whose permissions will be used for access to the module.
anon_desc2=You should be VERY careful when granting anonymous access, as insufficient IP access controls or granting access to the wrong module may allow attackers to take over your system.
anon_url=URL path
anon_user=Webmin user
anon_err=Failed to save anonymous access
anon_eurl='$1' is not a valid URL path
anon_euser=Missing or invalid Webmin user for URL path '$1'
enogpg=GnuPG is not installed
standard_failed=Failed to download modules list : $1
standard_header=Standard Webmin modules
standard_warn=Warning - you are not running the latest Webmin version $1, so these modules will probably fail to install.
standard_eurl=Invalid standard modules URL
third_failed=Failed to download modules list : $1
third_header=Third Party Webmin modules
third_eurl=Invalid third party modules URL
third_title=Select Third Party Module
lock_title=File Locking
lock_desc=By default, Webmin will obtain a lock on any file that it modifies in order to prevent concurrent modification by multiple processes, which could lead to file corruption. This page allows you to selectively or totally disable locking if it is causing problems.
lock_header=File locking settings
lock_all=Lock all files
lock_none=Never lock files
lock_only=Only lock files and directories ..
lock_except=Lock all files and directories except ..
lock_err=Failed to save file locking
lock_edir='$1' is not an absolute path
lock_edirs=No files or directories entered
ipkey_title1=Create SSL Key
ipkey_title2=Edit SSL Key
ipkey_header=IP-specific SSL key details
ipkey_ips2=For IP addresses and hostnames
ipkey_err=Failed to save SSL key
ipkey_eip2='$1' is not a valid IP address or hostname
ipkey_eips=No IP addresses entered
ipkey_eextracas=No additional certificate files entered
ipkey_eextraca=Additional certificate file $1 does not exist
descs_title=Module Titles
descs_info=This page allows you to specify alternate titles for Webmin modules, to override their standard descriptions.
descs_mod=Module
descs_cmod=Original module
descs_desc=New title
descs_cdesc=Clone title
descs_err=Failed to save module titles
descs_edesc=Missing title for module '$1'
descs_etitle=Missing title for clone '$1'
export_err=Failed to export modules
export_ecmd=Missing needed command $1
export_efile=Missing or invalid export file
export_done=Successfully exported the selected modules to $1.
export_title=Export Modules
advanced_title=Advanced Options
advanced_header=Advanced and experimental options
advanced_temp=Temporary files directory
advanced_tempdef=Default (<tt>/tmp/.webmin</tt>)
advanced_tdd=Clear temp files in non-standard directory?
advanced_tempdelete=Maximum age of temporary files
advanced_nodelete=Unlimited
advanced_days=days
advanced_preload=Pre-load Webmin functions library?
advanced_precache=Text files to pre-cache?
advanced_precache0=None
advanced_precache1=English language text files
advanced_precache2=Files matching shell patterns $1
advanced_eprecache=Missing list of shell patterns to pre-cache
advanced_err=Failed to save advanced options
advanced_etemp=Missing or non-existant temporary files directory
advanced_etdir=Missing or non-existant temporary files directory for $1
advanced_etempallowed=Temporary files directory $1 is a system directory
advanced_pass=Make password available to Webmin programs?<br><font size=-1>(Does not work when session authentication is enabled)</font>
advanced_tempmods=Per-module temporary directories
advanced_tmod=Module
advanced_tdir=Directory
advanced_stack=Show stack trace for error messages?
advanced_showstderr=Show Perl errors in browser?
advanced_umask=Umask (unset permission bits) for created files
advanced_chattr=Allow modification of immutable files?
advanced_eumask=Umask must be a 3-digit octal number
advanced_etempdelete=Missing or invalid maximum age of temporary files
advanced_nice=CPU priority for scheduled jobs
advanced_pri=Priority level
advanced_sclass=IO class for scheduled jobs
advanced_sprio=IO priority for scheduled jobs
advanced_gzip=Gzip compress static files?
advanced_gzipauto=Only if pre-compressed .gz file exists
advanced_gzip0=Never
advanced_gzip1=Use pre-compressed file and compress dynamically
advanced_egzip=Gzip compression cannot be enabled unless the $1 perl module is installed
advanced_redir=URL format for redirects
advanced_redir1=Path only
advanced_redir0=Protocol, host, port and path
advanced_listdir=List directories without an index file?
advanced_headers=Extra HTTP headers
advanced_eheader=Headers must be formatted like <tt>Header: Value</tt>
advanced_sortconfigs=Save config files sorted by its keys?
advanced_bufsize=Network buffer size in bytes
advanced_ebufsize=Network buffer size must be a number greater than zero
syslog_errorlog=Webmin error log
clear_title=Clear Download Cache
clear_done=The Webmin cache containing $1 of files from $2 URLs has been successfully cleared.
clear_none=There are no URLs currently in the Webmin download cache.
savekey_err=Failed to save new key
savekey_ekey=Missing or invalid PEM format key
savekey_ecert=Missing or invalid PEM format certificate
savekey_ecert2=Missing or invalid PEM format key and certificate
savekey_echain=Missing or invalid PEM format chained certificate
savekey_title=Upload Existing Key
savekey_done2=The supplied SSL key has been saved in $1, and the certificate in $2.
savekey_done=The supplied SSL key and certificate have been saved in the file $1.
savekey_done3=The supplied chained SSL certificate has been saved in the file $1.
cache_title=Cached URLs
cache_search=Find URLs containing:
cache_ok=Search
cache_none=No cached URLs matched your search.
cache_matches=Found $1 cached URLs matching your search ..
cache_url=Full URL
cache_size=Size
cache_date=Downloaded
cache_delete=Flush Selected From Cache
cache_err=Failed to flush cached URLs
cache_enone=None selected
cache_efile=Invalid filename
restart_title=Restarting Webmin
restart_done=The Webmin server process is now restarting - please wait for a few seconds before continuing.
mobile_title=Mobile Device Options
mobile_header=Options for mobile browsers
mobile_theme=Theme for mobile browsers
mobile_themeglob=<User's choice or global configuration>
mobile_nosession=Force use of HTTP authentication?
mobile_agents=Additional user agents for mobile browsers
mobile_err=Failed to save mobile device options
mobile_prefixes=URL hostname prefixes for mobile browsers
blocked_title=Blocked Hosts and Users
blocked_type=Type
blocked_who=Hostname or username
blocked_fails=Login failures
blocked_when=Blocked at
blocked_none=No hosts or users are currently blocked by Webmin.
blocked_user=Webmin user
blocked_host=Client host
blocked_clear=Clear All Blocks
blocked_cleardesc=Click this button to clear all current host and user blocks, by restarting the Webmin server process.
blocked_restarting=The Webmin server process is now restarting to clear blocked hosts and users - please wait for a few seconds before continuing.
refreshmods_title=Refresh Modules
refreshmods_installed=Checking for usable Webmin modules ..
refeshmods_counts=.. found $2 with installed applications, $1 not installed.
debug_title=Debugging Log File
debug_header=Webmin debug log file options
debug_enabled=Debug log enabled?
debug_what=Events to log
debug_what_start=Scripts starting and stopping
debug_what_write=Files opened for writing
debug_what_read=Files opened for reading
debug_what_ops=Other file operations
debug_what_procs=Operations on processes
debug_what_diff=Configuration file diffs
debug_what_cmd=Commands executed
debug_what_net=Network connections made
debug_what_sql=SQL executed
debug_file=Debugging log file
debug_size=Maximum size for log file
debug_err=Failed to save debugging options
debug_ewhat=No events to log selected
debug_efile=Debug log file must be an absolute path
debug_edir=Directory '$1' for debug log file does not exist
debug_esize=Maximum size must be a number
debug_procs=Script types to debug
debug_modules=Limit debugging to modules
debug_web=Web interface CGIs
debug_cmd=Command line
debug_cron=Background jobs
debug_inmods=Modules to write debug logs for
debug_emodules=No modules to debug for selected
notif_passexpired=Your Webmin password has expired! You will be forced to change it at the next login.
notif_passchange=Your Webmin password was last changed on $1, and must be changed in $2 days.
notif_passlock=Your Webmin password was last changed on $1, and your account will be locked in $2 days if it is not changed.
notif_changenow=You can <a href='$1'>change your password now</a> in the Change Language and Theme module.
notif_unixwarn=Your Unix password was last changed on $1, and must be changed in $2 days.
notif_unixexpired=Your Unix password has expired! You will be forced to change it at the next login.
notif_upgrade=Webmin version $1 is now available, but you are running version $2.
notif_upgradeok=Upgrade Webmin Now
notif_updatemsg=The $1 following Webmin module updates are now available ..
notify_updatemod=Module
notify_updatever=Version
notify_updatedesc=Fixes problem
notif_updateok=Install Updates Now
notif_reboot=Recent package updates (such as a new kernel version) require a reboot to be fully applied.
notif_rebootok=Reboot Now
status_title=Background Status Collection
status_header=Status collection job settings
status_interval=Collect system status in background?
status_interval1=Never
status_interval0=Every
status_mins=minutes
status_pkgs=Collect available package updates?
status_temp=Collect drive temperatures?
status_units=Units for temperatures
status_celsius=Celsius
status_fahrenheit=Fahrenheit
status_err=Failed to save background status collection
status_einterval=Collection interval must be an integer between 1 and 60
sendmail_title=Sending Email
sendmail_desc=This page controls how Webmin sends email, such as from scheduled backups or background monitoring. It also effects email sent using the Read User Mail module.
sendmail_header=Mail sending options
sendmail_system=Local mail server
sendmail_smtp=Send email using
sendmail_port=SMTP port
sendmail_portdef=Use default port
sendmail_portsel=Use port number
sendmail_ssl=Use SMTP SSL encryption?
sendmail_ssl0=Never encrypt
sendmail_ssl1=Always use TLS
sendmail_ssl2=Switch with STARTTLS
sendmail_smtp0=Local mail server command
sendmail_smtp1=Via SMTP to local mail server
sendmail_smtp2=Via SMTP to remote mail server
sendmail_login=SMTP server authentication
sendmail_login1=Don't authenticate
sendmail_login0=Login as
sendmail_pass=with password
sendmail_auth=SMTP authentication method
sendmail_authdef=Default (currently Cram-MD5)
sendmail_from=From address for email from Webmin
sendmail_fromdef=Default ($1)
sendmail_fromaddr=Address
sendmail_err=Failed to save mail sending options
sendmail_esmtp=Missing or un-resolvable SMTP server hostname
sendmail_eport=Missing or non-numeric SMTP port
sendmail_elogin=Missing SMTP server login
sendmail_esasl=SMTP authentication cannot be enabled unless the <a href=$1>$2</a> Perl module is installed.
sendmail_efrom=Missing or incorrectly formatted from address
sendmail_header2=Send test message
sendmail_to=Send message to
sendmail_subject=Message subject
sendmail_body=Message contents
sendmail_desc2=This form can be used to send a test email with the settings above, to ensure that mail is being delivered correctly.
sendmail_send=Send Email
sendmail_url=Webmin URL for use in email
sendmail_url_def=Default ($1)
sendmail_url_custom=Custom URL
sendmail_eurl=Missing or invalid custom URL
testmail_title=Send Test Email
testmail_err=Failed to send test message
testmail_eto=No destination address entered
testmail_sending=Sending message from $1 to $2 ..
testmail_done=.. message sent. Check the destination address's mailbox to ensure that it was actually delivered.
testmail_failed=.. sending failed : $1
web_title=Web Server Options
web_header=Options for Webmin's built-in webserver
web_expires=Client-side cache time for static files
web_expiresdef=Webmin default (7 days)
web_expiressecs=Time in seconds
web_err=Failed to save web server options
web_eexpires=Missing or non-numeric client side cache time
web_expirespaths=Client-side cache times based on URL path
web_expirespath=Path regular expression
web_expirestime=Cache time in seconds
web_eexpires2=Missing or non-numeric client side cache time in row $1
web_rediruurl=Post-login switch redirect URL
web_redirdesc=Internal redirect URL overrides
web_eredirurl='$1' contains spaces and is not a valid URL
web_redirhost=Redirect host
web_eredirhost='$1' is not a valid hostname
web_redirport=Redirect port
web_redirpref=Redirect prefix
web_eredirpref=Prefix must start with forward slash
web_eredirpref2=Prefix must not contain spaces
web_redirssl=Redirect SSL
webmincron_title=Webmin Scheduled Functions
webmincron_emodule=The Webmin Cron Jobs module is not installed!
webmincron_module=Webmin module
webmincron_func=Function name
webmincron_args=Parameters
webmincron_when=Run at
webmincron_none=No Webmin scheduled functions have been created yet. These are typically created by other modules, not by users.
webmincron_delete=Delete Selected Functions
webmincron_run=Run Selected Functions Now
webmincron_derr=Failed to delete scheduled functions
webmincron_enone=None selected
webmincron_rerr=Failed to run delete scheduled functions
webmincron_running=Running function $2 in $1 ..
webmincron_failed=.. failed : $1
webmincron_done=.. done
webmincron_return=list of scheduled functions
webmincron_header=Scheduled Function Details
webmincron_egone=Scheduled function does not exist!
webmincron_when0=Regular interval
webmincron_when1=Specific times
webmincron_secs=seconds
webmincron_err=Failed to save scheduled function
webmincron_einterval=Interval must be a number of seconds greater than zero
twofactor_title=Two-Factor Authentication
twofactor_header=Two-factor authentication options
twofactor_provider=Authentication provider
twofactor_none=None
twofactor_apikey=Authy API key
twofactor_test=Use provider's test mode?
twofactor_desc=Two-factor authentication allows Webmin users to enable use of an additional authentication device when logging in, such as a one-time passcode generator. Users must individually enroll with the selected authentication provider after it is enabled on this page.
twofactor_err=Failed to save two-factor authentication
twofactor_eprovider=Invalid provider!
twofactor_eusers=Two-factor authentication cannot be disabled, as the following users are currently enrolled : $1
twofactor_eapikey=Missing or invalid-looking API key
twofactor_email=Your email address
twofactor_country=Cellphone country code
twofactor_phone=Cellphone phone number
twofactor_eemail=Missing or invalid email address - must be formatted like user@domain.com
twofactor_ecountry=Missing or invalid country code - must be a number, like 65
twofactor_ephone=Missing or invalid phone number - only digits, dashes and spaces are allowed
twofactor_eauthykey=Authy API key is not valid, or is for the wrong mode
twofactor_eauthy=Error validating API key with Authy : $1
twofactor_eauthyenroll=Enrollment failed : $1
twofactor_eauthyid=Authy user ID must be a number
twofactor_eauthytoken=Authy token must be a number
twofactor_eauthyotp=Authy token is invalid
twofactor_enrolllink=You can now enroll for two-factor authentication in the <a href='$1'>Webmin Users</a> module.
twofactor_url=To learn more about $1, see its website at <a href='$2' target=_blank>$2</a>.
twofactor_etotpmodule=The Perl module <tt>$1</tt> needed for two-factor authentication is not installed. Use the <a href='$2'>Perl Modules</a> page in Webmin to install it.
twofactor_qrcode=Enter the secret code $1 in the Google Authenticator app, or scan the QR code below.
twofactor_etotpid=Invalid TOTP base32-encoded secret
twofactor_etotptoken=Google Authenticator token must be a number
twofactor_etotpmodule2=Missing Perl module $1
twofactor_etotpmatch=Incorrect OTP code
twofactor_secret=Personal secret key
twofactor_secret1=Generated randomly
twofactor_secret0=Use 16-character key
twofactor_esecret=Secret key must be exactly 16 characters long and contain only letters and numbers
twofactor_esession=Two-factor authentication cannot be used unless session-based authentication is active
letsencrypt_title=Let's Encrypt Certificate Request
letsencrypt_err=Failed to request certificate
letsencrypt_ecmds=Neither the Let's Encrypt client command <tt>certbot</tt> or the <tt>python</tt> command were found on your system
letsencrypt_epythonmod=The Python module $1 needed by the built-in Let's Encrypt client is not installed
letsencrypt_epythonver=Failed to get the Python version : $1
letsencrypt_epythonver2=Python version $1 or above is required, but you only have version $2.
letsencrypt_certbot=Certbot
letsencrypt_edroot=The Apache virtual host $1 has no document directory!
letsencrypt_edom=Missing or invalid domain name
letsencrypt_erenew=Missing or non-numeric renewal interval
letsencrypt_ewebroot=Website document directory does not exist
letsencrypt_evhost=No virtual host matching $1 was found
letsencrypt_efull=Expected full certificate file $1 was not found
letsencrypt_ecert=Expected certificate file $1 was not found
letsencrypt_ekey=Expected private key file $1 was not found
letsencrypt_doing=Requesting a new certificate for $1, using the website directory $2 ..
letsencrypt_doingdns=Requesting a new certificate for $1, using DNS validation ..
letsencrypt_failed=.. request failed : $1
letsencrypt_done=.. request succeeded!
letsencrypt_show=The new certificate and private key were written to the following files :
letsencrypt_cert=SSL certificate
letsencrypt_key=SSL private key
letsencrypt_chain=Chained CA certificate
letsencrypt_webmin=Configuring Webmin to use new cert and key ..
letsencrypt_wdone=.. done!
letsencrypt_eaccountkey=Failed to generate account key : $1
letsencrypt_etiny=Failed to request certificate : $1
letsencrypt_echain=Failed to download chained certificate : $1
letsencrypt_echain2=Chained certificate downloaded from $1 is empty
letsencrypt_ecsr=Failed to generate CSR : $1
letsencrypt_ekeygen=Failed to generate private key : $1
letsencrypt_enative=The native Let's Encrypt client (certbot) was used previously on this system, and must be used for all future certificate requests
letsencrypt_eacmedns=Only the official Let's Encrypt client supports DNS-based validation
announce_hide=Hide This Announcement
alert_hide=Hide Alert
__norefs=1